Screw air compressor moisture-proof measures

1. Check whether there is water around the air compressor. Conduct a detailed investigation of the foundation, geological structure, flood control facilities, emergency rescue facilities, etc. around the air compressor room to find hidden dangers and weak links, especially water accumulation. to clean up.

2. Check whether the air compressor room is leaking. In the rainy season, rain leakage and water seepage are prone to occur, resulting in short circuit of the circuit. In severe cases, it may even cause accidents such as electric leakage and injury. Everyone should check the air compressor room to see if there is any water leakage.

3. Keep the drain pipe of the air compressor unobstructed. Humid air is easy to form condensed water in the air compressor, and it should be discharged from the air compressor system in time. The residual condensed water will not only easily cause the emulsification of the air compressor lubricating oil, but also cause storage The corrosion and rust of the air tank affect the quality of compressed air.

4. Check whether the lubricating oil of the air compressor should be replaced. In humid weather, the water content in the air increases. During the compression process, the water in the air mixes with the lubricating oil of the screw air compressor, which will reduce the lubrication efficiency of the oil and accelerate the wear of the main engine rotor.

5. Check the device status before starting the machine. In rainy and humid seasons, before starting the air compressor, check whether the machine is flooded and whether the circuit system is intact, so as to prevent rainwater from pouring into the electrical box and burning electrical components. When a fault is found, it must be repaired in time without delay.

Sollant Group-Professional Compressed Gas Solutions Provider