Disassembly of the screw air compressor

1. Before disassembly, the structure of each part of the air compressor should be considered, and the operating procedures should be considered in advance to avoid inversion, causing confusion, or trying to save trouble, violently dismantling and knocking, resulting in damage and deformation of parts.

2. The order of disassembly is generally opposite to the order of assembly, that is, remove the external accessories first, then remove the internal parts, disassemble the assembly from the upper part to the lower part, and then remove the parts.

3. Use tools when disassembling.

4. The large air parts are very heavy. When disassembling, you must prepare lifting tools and rope sets, and pay attention to protecting the parts when tying and hanging them, so as not to bruise or damage them.

5. Put the disassembled parts and components in a suitable position, and do not place them randomly. For large and important parts, do not put them on the ground, but put them on the wood, such as the pistons, cylinders, etc. of large air compressors. Crankshafts, connecting rods, etc. should be specially prevented from being deformed due to improper placement, and small parts should be placed in boxes and covered. Precision parts should be kept specially.

6. The disassembled parts should be put together as much as possible according to the original structure. Complete sets or non-interchangeable parts should be marked before disassembly, and after disassembly, they should be put together or strung together with ropes, so as not to mess up, make mistakes during assembly and affect the assembly quality. , Replace lubricating oil and oil fine separator, check or replace sealing ring. Oil and fine separator filter elements can generally be used for 4000 hours, and special maintenance is not required during this time, but environmental factors will affect their service life, such as factories with particularly large dust in the environment, the service life of lubricating oil and filter systems will be greatly shortened .

In addition, if it is used in a dusty environment, the dust is easy to gather on the oil cooler, and the cooling effect will deteriorate. It should be cleaned according to the specific situation. Generally, it is required to be cleaned every 6 months to ensure the heat dissipation effect.

Sollant Group-Professional Compressed Gas Solutions Provider