What should be paid attention to when the screw air compressor is running?

1. At the first time of starting up, set aside at least three minutes to check the working health of the machine. If it is found that the machine has abnormal conditions such as abnormal noise, oil leakage and air leakage, in order to eliminate the danger, it should be shut down and self-inspected immediately.

2. Do not tamper with the line in the pipeline, and try not to open the valve to prevent the pressure from leaking out.

3. When the machine is working, you should always pay attention to the change of the minimum oil level. The oil level is generally higher than the shutdown oil level during operation. It is necessary to stop and check immediately, and replenish the oil level when appropriate.

4. According to different climates and drainage time, the condensed water inside the body should be discharged regularly, especially in summer.

5. Record the corresponding data such as exhaust pressure and temperature every day to achieve real-time data feedback. If you find that the data is abnormal, you can seek professional after-sales service. There is basically no additional cost during the maintenance period. In terms of air compressor operation, each of us must discover and solve problems in a timely manner, and develop good usage habits, which is conducive to the continuous and healthy operation of the machine. The replacement time of compressor cooling lubricating oil depends on the operating environment, humidity, dust and whether there is acid-base gas in the air. Newly purchased air compressors must be replaced with new oil after 500 hours of operation for the first time, and then replaced every 4000 hours according to the normal oil change cycle, and machines that operate less than 4000 hours per year should be replaced once a year. The oil filter should be replaced every 300-500 hours after starting up, the second time it should be replaced after 2000 hours, and then it should be replaced every 2000 hours according to the normal time.

When repairing and replacing the air filter or intake valve, remember to prevent any sundries from falling into the cavity of the compressor main body. When operating, close the entrance of the host. After the operation is completed, turn the host by hand for several times in the direction of rotation to confirm that there is no obstruction before turning it on.

The tightness of the belt must be checked every 2000 hours of the screw air compressor. If the belt is loose, it must be adjusted until the belt is tensioned. In order to protect the belt, it is necessary to prevent the belt from being scrapped due to oil pollution during the whole process. The oil filter must be replaced every time the oil is changed.

Sollant Group-Professional Compressed Gas Solutions Provider